Choke Manifold

1. Application

   Choke manifold is necessary device to control the well kick successfully and execute the pressure control technology on oil/gas well in the course of drilling, as it is, the device is adopted to execute new drilling-weH's technique of balance pressure, which can prevent the pollution oiHayer, improve the speed of drilling and control blowout effectively. One end of the device connects with the side flange of BOP spool. When BOP closes, it can control the finite pressure from casing by adjusting the choke valve's opening, so balanced driling can work under minimum pressure-difference.

2. Assembly & structure

   Choke manifold consists of choke valve, gate valve, pipeline, fittings and pressure gauge etc.

3. Working Principle

   When the pressure rising in well, fluid in well can be released in utilization of the choke valve opening / closing in choke manifold to control casing pressure, which can directly blow out through gate valve when the casing pressure is quite high.

4. Specification

   Pressure level is divided into five levels, i.e. 2000psi, 3000psi, 5000psi, 10000psi, 15000psi; it can be designed according to requirement of dient.

Choke manifold is according to the requirements of API Spec 16C

Working Pressure: 2,000psi ~ 15,000psi

Nominal Bore Size: 2.1/16" - 4.1/16"